Yongkang Sunshine Shot Blasting Material Co.,Ltd.

Metalic abrasive(20)

Yongkang Sunshine Shot Blasting Material Co.,Ltd.

Showing 1 - 10 of 20, total 2 pages [First] [Previous] [Next] [Last]

stainless steel shot
Specification: 0.2mm-1.5mm
Detail: Stainless steel shot: 1: supply stainless steel shot with high quality and most competitive price 2: size: 0.2mm to 2.0mm 3: SUS410 SUS430 S304 Main chemistry: SUS304 C: 0.08% Mn: 0.9% Cr:18% Ni:9% Si <1% ...

stainless steel shot(430)
Specification: 0.2mm-1.5mm
Detail: Stainless steel shot: Main chemistry: SUS304 C: 0.08% Mn: 0.9% Cr:18% Ni:9% Si <1% SUS302 C:0.08% Mn:V0.9% Cr:17% Ni:4-6% SUS430 C: 0.10% Mn:1.2% Cr:15-16% SUS4...

stainless steel shot
Specification: 0.2mm-2.5mm
Detail: Stainless steel shot: Main chemistry: SUS304 C: 0.08% Mn: 0.9% Cr:18% Ni:9% Si <1% SUS302 C:0.08% Mn:V0.9% Cr:17% Ni:4-6% SUS430 C: 0.10% Mn:1.2% Cr:15-16% SUS4...

stainless steel shot(sus304)
Specification: 0.2mm-1.5mm
Detail: Stainless steel shot: Main chemistry: SUS304 C: 0.08% Mn: 0.9% Cr:18% Ni:9% Si <1% SUS302 C:0.08% Mn:V0.9% Cr:17% Ni:4-6% SUS430 C: 0.10% Mn:1.2% Cr:15-16% SUS4...

stainless steel shot(sus302)
Specification: 0.2mm-1.5mm
Detail: Stainless steel shot: Main chemistry: SUS304 C: 0.08% Mn: 0.9% Cr:18% Ni:9% Si <1% SUS302 C:0.08% Mn:V0.9% Cr:17% Ni:4-6% SUS430 C: 0.10% Mn:1.2% Cr:15-16% SUS4...

cast steel shot
Specification: 0.3mm-2.5mm
Detail: cast steel shot/Cr and Mo alloy shot: Appearance is black and bright, shot form Martensite. Applied in shot blasting surface cleaning of raw Iron, tin, carbon steel and other casting extensively! Main chemistry: C:0.85-1.2...

steel shot
Specification: 0.3mm-2.5mm
Detail: Steel shot: Appearance is black and bright, shot form Martensite. Applied in shot blasting surface cleaning of raw Iron, tin, carbon steel and other casting extensively! Main chemistry: C 0.85-1.20% Si 0.40-1.50% Mn 0.6...

zinc cut wire shot
Specification: 0.6mm-2.5mm
Detail: Zinc cut wire shot: zinc cut wire shot are widely used for shot peening to give compressive residual stress in the surface layer of components for fatigue life enhancement and suppression of stress corrosion cracking and debu...

zinc shot
Specification: 0.6mm-2.5mm
Detail: Zinc shot: zinc shot are widely used for shot peening to give compressive residual stress in the surface layer of components for fatigue life enhancement and suppression of stress corrosion cracking and deburring and cleaning...


Showing 1 - 10 of 20, total 2 pages [First] [Previous] [Next] [Last]
1 2